XTOL 1:1 + Rodinal 1:100

08960006 08960005 08960004 08960002 08960001

I’m still playing around with XTOL/Rodinal split. These were deved in XTOL 1:1 + Rodinal 1:100 for 7:00 minutes at 75F, which was probably about 10% longer than ideal for my preferred density. I’m a little surprised that 6ml of Rodinal shifted the density by this much. In retrospect, I’m not even sure what this combo is supposed to accomplish. At this dilution, both of these developers are compensating, and XTOL’s solven action is already greatly diminished in comparison to its stock form. I suppose if I diluted the XTOL even further there would be even less solvent action and even more compensation, but that doesn’t seem like something I really need.

can I buy a variable

08910001

vivo barefoot desert boots, size 15

I found myself last week describing my efforts to roast coffee to a friend who’s successfully made the transition from home brewer to pro. He watched me go from a Nikon FM2 and a flatbed scanner to a Leica & Coolscan 9000 while he was on a parallel path learning to brew beer. He┬áreminded me of something that I eventually learned from photography; in any process based craft, at some point, you spend money to control variables. This is true whether that craft is photography, coffee roasting, beer brewing, or fly fishing. When you are just starting out, when the frustrations of failure are most apt to derail you, is, unfortunately, when you need to spend the most money. Before you know what you are doing, you never know if your failures are due to bad luck, poor knowledge, crappy equipment, entropy or any one of 1000 other things, so eliminating whatever variables you can becomes vital. Of course, very early on, you barely know what variables you need to control, so it’s hard to know where to spend the cash.

08910004

drinking coffee and eating pastries at All Good Things in Tribeca

It was a well timed discussion, as I’d just bought a new roaster, and by roaster, I mean a better pop corn popper. Controlling temperature with the whirly pop was proving to be difficult. Luckily, I don’t just know brewers. A correspondent in the coffee world┬ásuggested a hot air pop corn popper. Early results are promising. Since the hot air popper is either on or off, that’s one variable set aside for the moment, although I’m sure I’ll need to deal with temperature eventually. For now it’s just the bean, the time, and the sun spots, which is enough for the moment.

08910003

think safety

In other news, I’ve switched almost entirely to the glass carrier for my Coolscan. The results are so much better in terms of both resolution and tonality, that I can’t quite bring myself to post a few of the comparison frames I tried early on; if I think about the differences too long I’ll want to go back and rescan things. If you are curious, compare the corners of the full size images attached to this post against some from a few months back. Check out the difference in grain resolution. Pretty amazing, huh? What’s even more interesting is that the tonality is different. Vuescan seems to be able to calculate exposures much better with the glass carrier. I’d noticed this when scanning MF, but I’d kind of the thought it was just the extra tonal resolution available with the larger negative. Apparently that’s not the whole story.

08910008

wires

The only downside to the glass carrier is the speed. The time scanning is the same per frame, but the operations between scans are much slower. Instead of loading up twelve frames, and hitting scan, now I’m loading up single strip, previewing manually to find the frame I want, repositioning manually etc etc etc. It’s slow. Good thing I’m not shooting as much as I was a few years ago.

What does this have to do with any of the photos in this post? Nothing.